CONCEPT FOR HERMETIC, LOW HEAT, MINIMUM INDUCTION PACKAGING FOR SEMICONDUCTOR CHIPS
- Efficient protection from the atmosphere
- Thermal resistance reduction
- Induction and parasitics effects reduction.
The thermal management and the miniaturizaiton are key-aspects in the construction of semiconductor chips. Another important aspect is the minimization of the inductance, which must be kept as low as possible in order to reduce parasitic effects and high voltage peaks. Furthermore, humidity and corrosive atmosphere cause degradation of the semiconductor elements. Standardly, the semiconductor elements are mounted on one side of a direct bonded copper (DBC) and all other electric contacts are provided thorugh wire bonds. This construction is relatively easy to realize, but it provides a bad heat-dissipation and a bad protection from the atmosphere and causes a high inductance. 3D-modules are currently available on the market. Such 3D-moduls solve some of the afore mentioned problems, but their manufacturing process is complex and expensive.
The invention consist of a 3D hermetic packaging concept. Semiconductor elements (MOSFETs or IGBTs) soldered on a DBC are hermetically insulated with a cap. Futher the elements can be soldered between two DBCs, creating an ordered 3D-strucuture. This construction can be built in few steps, limiting the costs of the manufacture. It additionally provides the following advantages:
- the semiconductor elements are efficiently protected from the atmophere;
- the heat is dissipated in two directions, reducing the thermal resistance up to 56,3%;
- no wire bonds are needed, drastically reducing the inductance and the failure rate due to parasitic effects.