Skip to main content

Battery electrodes made of silicon layers with optimized porosity and microstructure


Abstract

The use of silicon as anode material promises high theoretical energy density in lithium-ion batteries. However, the volume of a silicon-based anode may increase substantially during lithiation. In order to solve this problem, scientists at the Institute of Photovoltaics (ipv), University of Stuttgart, now succeeded in developing a method for producing micro-stabilized and porous silicon anodes by means of laser irradiation. The battery electrodes related to this invention offer a high potential for lithiation and at the same time improved mechanical stability. Due to a large active surface they provide high energy density. They can be used for the production of mechanically flexible batteries.


Background

Since the theoretical capacity of silicon-based anodes is significantly higher than that of conventional carbon-based anodes, methods are required which enable mass production of stable silicon anodes. The silicon-based electrode related to this invention is able to absorb a large amount of ions while maintaining a high level of mechanical stability. It can be produced in a cost-efficient manner and is designed to be used for both primary cells (e.g. silicon-air batteries) and secondary cells (e.g. Li-ion batteries).


Images & Videos


Problem

Using silicon as anode material in primary and secondary cells promises to enable high theoretical energy density. However, the silicon-based anode will increase in volume with the inclusion of ions. Such swelling causes mechanical stress on the anode structure, eventually leading to degradation and electrode breakdown.
Previous approaches have tried to prevent volume expansion by producing silicon electrodes with controlled porosity. However, they often cannot adequately solve the swelling issue and usually involve high manufacturing costs.


Solution

Scientists at the Institute for Photovoltaics (ipv), University of Stuttgart, now succeeded in developing silicon-based anodes of porous and micro-stabilized semiconductor layers.
Microstabilization is based on a simple process – for example by producing differently doped areas by means of local laser irradiation. In particular p-doped areas on an n-doped semiconductor layer will act as support areas as they store a smaller amount of ions than n-doped areas. This will prevent volume expansion while improving the anode’s mechanical stability. The three-dimensional grid structure of the support areas can also be produced by crystallization, i.e. stabilization of the grid points.
The semiconductor layers are applied to a plastic or metal foil using a vacuum method. If necessary, several layers are deposited and microstabilized in order to increase material thickness. The coated film is metallized and contacted so that it can then be wound up with a second electrode, the electrolytes (e.g. gel on flexible, porous substrates) and, if necessary, the separator membranes to be encapsulated in a housing.
Initial experiments with a laboratory model have already shown that the capacity remains stable at about 950 mAh/g after 300 charge/ discharge cycles.


Advantages

  • High specific capacity by enhanced lithiation combined with improved mechanical stability
  • Production of mechanically flexible batteries
  • High energy density due to a large active surface: Stable charge capacity of 1650 mAh/g already shown in laboratory experiments
  • Simple connection of individual cells in series or in parallel during the deposition process
  • Cost-effective solution thanks to low material consumption and ease of manufacturing 

Scope of application

The battery electrodes made of silicon are suitable for use in both primary cells (e.g. silicon-air batteries) and secondary cells (e.g. Li-Ion batteries).


Service

Technologie-Lizenz-Büro GmbH is responsible for the exploitation of this technology and assists companies in obtaining licenses.


Technologie-Lizenz-Büro (TLB) der Baden-Württembergischen Hochschulen GmbH

Dr.-Ing. Hubert Siller
+ 49 721 790 040
hsiller@tlb.de
www.tlb.de
Address
Ettlinger Straße 25
76137 Karlsruhe



Development status

Prototype


Patent situation

  • EP 3 087 630 granted
  • CH (EP 3 087 630) granted
  • DE 50 2014 009 332.0 granted
  • FR (EP 3 087 630) granted
  • GB (EP 3 087 630) granted
  • US 10,566,615 granted

Keywords

Li-Ion Accu, silicon battery, thin film silicon, primary battery, secundary battery, rechargeable battery, accumulator, primary cell, secundary cell, silicon-air battery, lithium-ion

Contact | Main Office

TransferAllianz e. V.
Christiane Bach-Kaienburg
(Geschäftsführerin)

c/o TransMIT GmbH
Kerkrader Straße 3
D-35394 Gießen