The invention uses an individualized foot dummy to provide the possibility of examining the lower leg orthosis in order to enable adequate...

Method and corresponding device for the production of dimensionally stable allogenic or xenogenic bone replacement material.

Production process for a highly sensitive biosensor made from a crossed nanowire-structure field-effect transistor. The cost effective CMOS compatible...

Sustainable charging station for small, battery-operated appliances This modular charging station for small, battery-operated devices like electric...

Simultaneous Excitation and Acquisition in MRI with an Automatic Active Cancellation System to Image Tissues with Short T2

A novel manufacturing technique for novel imaging techniques

The present invention combines new synthetic ways to new Cryptophycin derivatives with alternative conjugation possibilites and pico-molar...

Manufacture of a device for simultaneous electrical and mechanical in vitro stimulation of cells to promote regeneration of musculoskeletal tissues.

The invention relates to a filter device for air purification, in particular

For inactivation of viruses, which is composed of an air-permeable,...

• Disinfection, periodontitis,
• polyhexamethylene biguanide, PHMB
• chronic inflammation

The invention relates to ion mobility spectrometers (IMS) and is characterized by a significant improvement in sensitivity.

Lock-in amplifier with optimal noise suppression

Low-common-mode, three-phase PFC stage for on-board chargers

Darobactin is a promising lead structure for antibiotic development.

In search for active substances corresponding to ZIP-9 at the Justus-Liebig-Universität, tetrapeptides were identified by means of molecular...

At the Department of Veterinary Medicine at the Justus-Liebig-Universität Gießen, upon investigation of myoblasts, i.e. precursor cells of...

Hydrostatic sliding bearing with minimal leakage

Process for the electrochemical synthesis of thiophenols from phenols

Measuring device and measuring method for the temporally high-resolution representation of the actual move-ment of a muscle in relation to its...

The invention provides a baculovius based expression System for targeted down-regulation of any gene on the bacuiovirusgenome or the cellular ...

A new artificial circular RNA prevents SARS coronavirus 2 (SARS-CoV-2) from replicating in infected cells.

High-pressure and vacuum-proof sapphire glass windows in a metal flange for high temperatures

Long-term stable water electrolysis through electrode coating

Magnetic field sensor for detecting magnetic particles in fluids

TMPRSS2 and furin are both essential for proteolytic activation and spread of SARS-CoV-2 in human airway epithelial cells and provide promising drug...

Derivatization of phytic acid with fatty alcohols

The device allows direct insertion of the cannula into place in one go and enables the correction of mistakes without needing to start over

Polymer-particle light-cleavable carrier systems for photodynamic therapy (PDT)

A process for the spray freeze-drying of lipophilic compounds

Speed-adaptive isokinetic particle sampling

The technology relates to a process for a much cheaper and easier production of components with a precisely defined porosity. By applying the method...

The process according to the invention can be used primarily by manufacturers of cutting tools as well as by regrinding companies of rotationally...

The new diaplatin complexes show activity against human cancer cell lines, thus proving their applicability in cancer therapy.

At the Department of Veterinary Medicine at the Justus-Liebig-Universität Gießen, upon investigation of myoblasts, i.e. precursor cells of skeletal...

New drug target for treating open and closed wounds as well as chronic pain and itch

Manufacturing process for oxygenators of different volumes

The invention describes a method and associated apparatus for the in situ regeneration of cartilage defects.

...

How cars learn to recognize their surroundings correctly

3D printer for large-volume components

New component for touchscreens and optoelectronic circuits

The Helmholtz Innovation Lab “FlexiSens” focuses on the development and application of a flexible and printable magnetic field sensors (Hall effect...

Here, an extremely simple and effective screening method for the identification of cell-compatible drugs against viruses such as SARS-CoV-2,...

High-Redshift BODIPY Dyes for 2-Photon Imaging

Scientists at the Karlsruhe Institute of Technology have developed environmentally stable and 2D printable inorganic thermoelectric materials on an...

Down-regulation of NCALD in spinal muscular atrophy and diseases with a disturbed calcium homeostasis

A new technology to fix and weld thin foils without laborious and expensive fixtures.

The invention addresses both the optimization of electrode forms for high frequency device operation as well as innovative solutions for their...

VEGF-multimer based apheresis to treat preeclampsia

The present invention relates generally to the structure and activity determination of biomolecules. By developing biofunctionalized graphene layer as...

The invention concerns the correct tracking of several objects, which can be seen in a video, and the simultaneous, correct identification of the...

The two-axis rotator ROTAX is an innovative component for the precise spatial alignment of material samples during measurements under extreme...

With the Tensormeter, all components of the electrical resistance of thin layers, such as silicon wafers, can be measured quickly and precisely with...

The torque sensor “ARGUS” uses magnetic fields to monitor mechanical loads in shafts and axes. With ARGUS eyes, the sensor measures a large number of...

Positron annihilation spectroscopy is a non-destructive method for the qualitative and quantitative analysis of material properties on the nanometer...

The invention concerns a novel, polymer-based drug depot system which is introduced into the human body, where it enables a continuous release of the...

Scientists at the University of Stuttgart have developed two new methods for spatially resolved single-shot FT spectroscopy, which can be used to...

The new test procedure simulates on a carrier material how the chemical substance or food acts on a certain metabolic process of the human body, e.g....

The new analytical method presented herein allows the qualitative and quantitative analysis of structurally isomeric compounds of a mixture by...

The technology according to the invention relates to the field of build-up welding, or the additive manufacturing of components made of metal

Nanoscopic zoomlenses, dynamic beam steering and holograms – thanks to an inventive combination of metamaterial on top of a phase change material, all...

Using an optical or electrical signal to change the chirality and therefore the optical activity in either the visible, infrared or THz spectrum for a...

Common-mode-free three-phase non-isolated on-board chargers

Intrinsically flame retardant polystyrene without halogens

Plasmonic nano-antenna made of Yttrium dihydride have optical properties, that can be changed reversely by adding hydrogen without being sensitive to...

Complex optics in small devices – by using several diffractive optical elements this is now possible. The optical elements are printed in one piece...

For passive collection of brake dust, the present brake dust collector uses a final separator to shed the dust containing boundary layer off the...

For efficient collection of brake or tire dust, this present brake dust collector uses an air feed to shed the dust containing boundary layer off the...

This technology (antenna array and algorithm) enables the precise identification of metallic objects and reduces electromagnetic reflection effects....

Laser amplifiers play an important role in industrial production processes. A constant high quality of the laser pulses is indispensable for an...

This robust trepanning optics with only one rotating element (grid mirror) offers great flexibility with regard to the realizable drill diameter/...

These broadband grating waveguide mirrors with a diffraction efficiency of 99.7 %, that are as well polarization and wavelength selective, can be...

The emitting spectral bandwidth of laser diodes for semiconductor diode lasers is optimally reduced to a very small range. Resonant waveguide grating...

Optogenetics as a new field of research in genetics analyses the effect of lasers on single cells.

Researchers at the University of Konstanz, Germany have developed a mineral plastic foam that, as a bio-inspired hybrid material, can solve many of...

The invention relates to a method for preventing fires in tank systems as well as several design examples for tank systems for methanol fuels with a...

This technology provides the fundamental for a native wound gel that is capable of comprehensive treatment of deep and large area wounds. Due to its...

...

2D electrocatalysts have been developed as a new class of high performance electrocatalysts. Due to the need to replace the scarce precious...

For the energy revolution, fuel cells play a key role for future energy systems. Especially solid oxide fuel cells (SOFC) are well-suited for...

Chimeric mutants of interferon alpha 2 and other interferon alpha subtypes with improved antiviral activity

A laser soldering process has been developed that outranges existing methods. The big advantage of disc lasers is that the laser active material can...

Thanks to a clever design of the laser disk itself, the depolarization caused by the two heat spreaders can be neutralized. This creates a very...

The development of a new kind of head spreader allows to control the contact surface between laser disc and head spreader. Through this invention, the...

A process for the production of fiber-reinforced metal foam, esp. aluminum foam

Instead of letting the seed beam cross the pump spot as often as 80 times, now a much smaller seed beam can be used for gridding the pump spot,...

The invention relates to an imaging optical system for dermatological diagnostics, which on the one hand visualizes diagnostically relevant ...

Radar-based plasma characterization

In people with bee venom allergies, a sting can cause a sometimes life-threatening anaphylactic reaction. This reaction is caused by IgE antibodies...

A particularly skin-friendly microemulsion is provided for hyposensitization against insect venom allergens, especially bee and wasp venom, but also...

Encrypted cooperative control for network systems

A coumarin-caged forskolin derivative for temporally controlled cellular cAMP production was synthesized. The water-soluble caged forskolin derivative...

Subject of the invention is a holder for microscopy slides, which allows freely adjusting and selecting the space between the slides, creating a...

The described technology concerns a tunnel field-effect transistor (TFET) with superior tunnelling currents.

For material characterization and analysis, we provide a data-driven process, which enables the chemical interpretation of core-level X-ray...

The new method presented herein consists of two simple steps for chemically modifying the surface of cellulosic materials, e.g. macroscopic sheets,...

The invention addresses both a device and a method for determining the electrical resistance of an object.