High-Redshift BODIPY Dyes for 2-Photon Imaging

The present invention relates generally to the structure and activity determination of biomolecules. By developing biofunctionalized graphene layer as...

The two-axis rotator ROTAX is an innovative component for the precise spatial alignment of material samples during measurements under extreme...

Positron annihilation spectroscopy is a non-destructive method for the qualitative and quantitative analysis of material properties on the nanometer...

The invention concerns a novel, polymer-based drug depot system which is introduced into the human body, where it enables a continuous release of the...

The new test procedure simulates on a carrier material how the chemical substance or food acts on a certain metabolic process of the human body, e.g....

The new analytical method presented herein allows the qualitative and quantitative analysis of structurally isomeric compounds of a mixture by...

Optogenetics as a new field of research in genetics analyses the effect of lasers on single cells.

Researchers at the University of Konstanz, Germany have developed a mineral plastic foam that, as a bio-inspired hybrid material, can solve many of...

2D electrocatalysts have been developed as a new class of high performance electrocatalysts. Due to the need to replace the scarce precious...

A coumarin-caged forskolin derivative for temporally controlled cellular cAMP production was synthesized. The water-soluble caged forskolin derivative...

The new method presented herein consists of two simple steps for chemically modifying the surface of cellulosic materials, e.g. macroscopic sheets,...

To produce wood-based composites urea-formaldehyde resin is the most widely used binder. However, UF resins are susceptible to hydrolysis and ...

This on-chip optofluidic array with organic lasers is ideal for rapid on-site investigation of any analyte that absorbs (itself or its products of a...

New route to protein-coupling via intein trans-splicing in the absence of reducing agents

Tetrakis(perfluororganyl)gallate for LIBs, ILs and photocatalysis

The invention concerns a controlled local drug release via neuronal electrodes, e.g. for cochlear implants.

Prof. Weigand and Prof. Eychmüller from TU Dresden found less toxic aminopnictogen precursor solutions for the synthesis of group III/V quantum dots...

The substances presented here are hydroquinone derivatives which are nitrogen-substituted in the carbon skeleton, so-called dihydroxyphthalazines. As...

Molten Salt Shielded Synthesis (MS3) is a novel process to synthesize non-oxide powders in air. MAX phases are a new family of materials with high...

Multifunctional ESR / DNP Tracer Molecules

Alkynes have a great importance in complex chemical synthesis. Currently used reagents for alkynylation are often highly explosive and do not allow...

Scientists from Saarland University and the INM-Leibniz Institute for New Materials developed an innovative, transparent and self-healing coating...

Preparation of Maltodextrin Nanoparticles for Drug Delivery of hydrophilic drugs

Innovative adhesives based on PLLA

• This invention forms the basis for modules highly-efficient at producing hydrogen using solar energy.
• The transport of the gases produced and the...

Cathode materials for batteries and hybrid supercapacitors

Researchers of the Niederrhein University have invented a method to produce electroluminescent textile surface by conventional printing methods.

The invention related to a process for the preparation of ligand- free gold nanoparticles (Au-NP).

Despite its relatively high costs polycarbonates are in many cases the first choice if high quality synthetics are needed. Scientists from the Georg...

Metabolic engineered C. glutamicum with highly attractive glutarate titer, yield and productivity

Chitosans are a family of functional biopolymers, typically produced by partial de-N-acetylation of chitin, one of the most abundant biopolymers in...

The Oddy test is currently used by numerous museums, collections and archives due to its relatively simple application and low cost to effectively...

Scientists from Goethe University Frankfurt am Main developed a new method for micro-diamond synthesis. The method facilitates diamond ...

Weakly concentrated industrial wastewaters are an important secondary source of gallium and indium that can - when exploited economically - contribute...

With the present invention, the energy density of rechargeable batteries and the power density of supercapacitors can be improved.

Increase yield in crude oil production

The method developed at RWTH Aachen University enables the identification of immune primers using OTR monitoring in a new and very efficient way....

Engineering of Basidiomycota for biotechnological processes

Click-MS spectrometry to trace metabolism of fatty acids and sterols

A method for switching and tuning gas transport and gas separation through metal-organic framework membranes by applying light of certain ...

Scientists from the University of Goettingen developed first row transition metal ions (i.e. Fe/ iron) supported by macrocyclic ligands to provide...

With this new process, structured substrates can be laminated without damaging or narrowing the underlying functional structure. The method is simple...

Uniaxially oriented high-modulus and high-strength PET and PBT

Disposable co-cultures chamber for on-site toxicity testing

In a project funded by the Baden-Württemberg Stiftung gGmbH, the Fraunhofer-Institut für Werkstoffmechanik IWM has developed an improved pre-treatment...

The biological age can reliably be determined with this innovative biomarker set consisting of 30 newly identified biomarkers with a high correlation...

Today, a wide range of pharmaceuticals can be found in waste waters, surface waters, groundwater and also drinking water. Particularly critical are...

The innovation presented herein, provides a new type of (white) light source with a most brilliant emission characteristic for applications which need...

The invention relates to a process for producing biochar by hydrothermal carbonization of biomass.

Batteries with zinc anode are known for quite some time now. From an economic point of view, the subgroup zinc-air-batteries is especially...

We are offering a new composite material for the thermochemical water & heat storage.
Our new polymeric material is based on the salt hydration...

A new copper-based substance class for application in organic light diodes. 

Here, we present the first screening system in yeast that permits high-throughput screening of cDNA libraries for ternary binding partners of a known...

Uniquely cost-effective, sensitive and selective formaldehyde sensor with a measuring range of 0 - 300 (1000) ppb in metal oxide sensor design (MOX)....

Our innovation presents an electrode for hydrogen and oxygen production in (bio)reactors.
We are offering an all-in-one device that produces a...

A new structural class with antibiotic activity was developed from the privileged structure of bacterial signal molecules. The compounds are...

The described technology enables a safe, fast chemical production of aliphatic linear dinitriles, e.g., adipodinitrile, with a long-term perspective...

A new process for the formation of bi- or multi-axially oriented polymer structures has been developed.

With the new combination catalyst, it is possible for the first time to achieve a very selective and thus by-product-free oxidation of alkanes /...

Scientists of the MEET at Wilhelms University of Muenster developed a set of alkylsilyl complexes (MOSi) as elecrolyte additive, which enhance the...

Production of itaconic acid in a controllable fungi expression system

Enantiomerically pure N-acyl-a-aminonitriles gained these days interest in the pharmaceutical industry since a range of recently developed...

The present invention focuses on Bacillus methanolicus, a gram-positive bacteria which is able to use C1-compounds like methanol as the only C- and...

"Q-primers" are ammonium compounds, which make it possible to permanently functionalize virtually any surface. It is an environmentally friendly and...

At the Karlsruhe Institute of Technology (KIT), a new platform concept for the formulation of highly conductive, printable pastes has been developed....

Currently, there are only very few, costly synthetic routes for the production of ultra long-chain compounds, as they typically rely on tedious...

The invention relates to a control device and process which optimizes the feeding ration of biogas plants by calculating kinetics of disappearance of...

The invention relates to a process producing biogas having a constant adjustable proportion of methane.

The invention relates to a process, producing and using filters based on bio-coal for removing harmful substances such as sulfur, phosphorus or...

This invention aims to utilize a biological hydrolysis process for treatment of animal feedstuff to reduce or remove the natural anti nutritive...

The invention relates to a biodegradable combination for treating diseases in which the intraocular pressure is elevated, comprising an active...

The invention relates to a method and device for thermodynamic separation of carbon dioxide out of combustion fumes. It delivers a solution, which is...

The invention relates to a device for fluid transport through micro fluidic channels.

The invention relates to a device for flow control in micro fluidic channels or in micro fluidic devices.

Physikalisches Trennverfahren zur Gewinnung von Metallen spart erhebliche Mengen umweltschädlicher Chemikalien ein

The swelling characteristics of proteins, amino acids or drug constituents is used to determine these polymeres in liquids both qualitatively and...

_{Method that uses a flame ionization detector to determine hydrogen}

The Fischer-Tropsch synthesis is an important process to convert coal, natural gas and biomass to a variety of hydrocarbon products and oxygenates of...

The efficiency of power production by fuel cells is superior to thermal engines. The key element of hydrogen-oxygen fuel cells is the membrane...

Chlorination of alcohols is a crucial step in the production of e.g. pharmaceuticals, pesticides, dyestuffs and disinfectants. Established methods...

The herein presented new architecture of a bioreactor basically consists of an inner and outer cylinder, whereas the disperse phases are added in...

New adsorption process for the purification of dicarboxylic acids

Scientists of the FH Münster developed several novel intrinsic antimicrobial polymers.

Inhibitors of the AKT pathway with a new mode of binding

Production process for the preparation of designer HAAs

Non-invasive Multiparameter Detection in Microfluidic Devices

Easy Emulsion Separation in Bioprocesses

Scientists from Goethe University of Frankfurt am Main synthesized novel arylborane compounds with extraordinary electronic, chemical, and optical...

Non-Electrical Dew point and Temperature measurement through a long distance optical fiber probe

Researchers from Goethe University Frankfurt am Main have developed a portfolio of silylene-based chemistry allowing for the synthesis of defined...

Light-sheet-based fluorescence microscopy (LSFM) is a powerful method to analyze 3D living or fixed biological samples - such as cell cultures,...

Light-sheet-based fluorescence microscopy (LSFM) is a powerful method to analyze 3D living or fixed biological samples - such as cell cultures,...

Transition metal doped zinc oxide for lithium-ion batteries

Treatment of AML by inhibitors of NHR2 and/or RUNX1/ETO-tetramerization