Thanks to a new type of integration of the shut-off needle into the injection plunger and clever guidance of the plastic melt, the production of...

Optimized combi nozzle for isotropic 3D printing. Combination of specifically shaped nozzle orifice with pressure-based attachment to the existing...

Novel raw material input for the production of green steel. In addition to hydrogen, a carbon-containing aerosol is used to produce green steel.

The new mechanochemical process developed by scientists at Ruhr- Universität Bochum describes the synthesis of hydroxyaryl ketones in which, for the...

Mechanochemical synthesis of HAT-CN by condensation of hexaketocyclohexane and diaminomaleonitrile in refluxing acetic acid. The new process, which...

SoSiCon is a project that is intended to contribute to the energy turnaround. It would solve two problems of wasting resources at the same time. It...

The invention is a method for increasing the buoyancy forces by suppressing / decelerating the stall of ship rudders.

The invention is a method for deriving the fuel gas properties from the combustion behaviour of so-
called dual-fuel engines in the large engine sector...

The invention GCAS covers the specific use case of real-time collision avoidance during operation by continuous position exchange across system...

Moving blades can be used in compressors, superchargers and exhaust gas turbochargers to increase overall efficiency by extending the operating range....

The efficiency in fuel cells can be increased by using the waste heat of the fuel cell and the pressure energy of the hydrogen tanks. A system module...

Catalytic doped fabric for industrial filtering applications

Steuerung einer Versorgungstechnik eines Gebäudes mittels eines neuronalen Netzwerks

The tuning stability of stringed instruments - e.g. guitars - depends, among other things, on the fixation of the two string ends. The underlying...

High Efficiency Power Amplifier with Large Back-Off and Wide Bandwidth

In order to be able to use 3D printing systems economically and efficiently in series production, the available installation space in the 3D printer...

The objektive of this technology is to improve the additive manufacturing of concrete components in order that geometrically complex and individual...

<strong>Adaptive supply air throttling for efficiency increase of exhaust air throttled pneumatic drives </strong>

Automated towline handover

Automated Function Calibration

The new technology includes a process to reduce/avoid thread pulling during the automatic gluing of components.

We have developed an electrocatalytic material for oxygen evolution reactions (OER) in alkaline solutions. The main purpose of this activity is to...

It is widely accepted that using fuel cell systems in a civil aircraft can improve the design in multiple ways, such as reduced noise, lowered ...

3D-concrete printing with integrated textile reinforcement

Diskret verstellbare Verdränger-pumpe

Korrosionsschutz für verbundgegossene Leichtbaustrukturen

Hydrostatic sliding bearing with minimal leakage

High-pressure and vacuum-proof sapphire glass windows in a metal flange for high temperatures

Derivatization of phytic acid with fatty alcohols

A process for the spray freeze-drying of lipophilic compounds

The technology relates to a process for a much cheaper and easier production of components with a precisely defined porosity. By applying the method...

The process according to the invention can be used primarily by manufacturers of cutting tools as well as by regrinding companies of rotationally...

A new technology to fix and weld thin foils without laborious and expensive fixtures.

The torque sensor “ARGUS” uses magnetic fields to monitor mechanical loads in shafts and axes. With ARGUS eyes, the sensor measures a large number of...

Positron annihilation spectroscopy is a non-destructive method for the qualitative and quantitative analysis of material properties on the nanometer...

The technology according to the invention relates to the field of build-up welding, or the additive manufacturing of components made of metal

Nanoscopic zoomlenses, dynamic beam steering and holograms – thanks to an inventive combination of metamaterial on top of a phase change material, all...

Common-mode-free three-phase non-isolated on-board chargers

For passive collection of brake dust, the present brake dust collector uses a final separator to shed the dust containing boundary layer off the...

For efficient collection of brake or tire dust, this present brake dust collector uses an air feed to shed the dust containing boundary layer off the...

This technology (antenna array and algorithm) enables the precise identification of metallic objects and reduces electromagnetic reflection effects....

Laser amplifiers play an important role in industrial production processes. A constant high quality of the laser pulses is indispensable for an...

This robust trepanning optics with only one rotating element (grid mirror) offers great flexibility with regard to the realizable drill diameter/...

These broadband grating waveguide mirrors with a diffraction efficiency of 99.7 %, that are as well polarization and wavelength selective, can be...

The emitting spectral bandwidth of laser diodes for semiconductor diode lasers is optimally reduced to a very small range. Resonant waveguide grating...

The invention relates to a method for preventing fires in tank systems as well as several design examples for tank systems for methanol fuels with a...

Thanks to a clever design of the laser disk itself, the depolarization caused by the two heat spreaders can be neutralized. This creates a very...

The development of a new kind of head spreader allows to control the contact surface between laser disc and head spreader. Through this invention, the...

Instead of letting the seed beam cross the pump spot as often as 80 times, now a much smaller seed beam can be used for gridding the pump spot,...

Radar-based plasma characterization

Environmentally friendly method of removing oil from water

New control method provides variable output voltages

This on-chip optofluidic array with organic lasers is ideal for rapid on-site investigation of any analyte that absorbs (itself or its products of a...

Function-integrated Lithium-ion battery load carrier

Trennung von Chassis und Fahrgastzelle

Bisher angewandte Instandsetzungsmaterialien sind massiv gefüllt und besitzen eine Dichte von ca. 2 g/cm3, was zu einer weiteren Beanspruchung des zu...

This heavy duty anchor is specially designed to withstand the dynamic loads of earthquakes. The load on the fastenings is reduced so that the...

For the first time, the inventive process enables the manufacturing of LDS-structurable moulded parts from polyether ether ketone (PEEK) with surface...

Molten Salt Shielded Synthesis (MS3) is a novel process to synthesize non-oxide powders in air. MAX phases are a new family of materials with high...

An additive joining technique developed at the University of Stuttgart makes it possible to connect individual components with each other positively...

Traversing device for textile machines

High-speed knitting process

Based on the Kerr effect, the Kerr band switch implements an alternative concept to mode coupling for the generation of ultra-short laser pulses ...

The recurring fire protection test for intumescent systems can be carried out minimally invasive directly on site by means of this compact test...

A new column damping system for buildings and structures

Particle anemometer to measure air speed and warn of potential stall for aircraft

Subaquatische Rohstoffgewinnung bei geringem Energieeinsatz

High efficiency head for fast melting probes

Conical (v-shaped) sliding bearing for the Wind Turbine main bearing

Highspeed-Schusseintrag im Kettwirken

Virtuelle Klimatisierung

Selbst geregelter Hybrid-Radsatz

Partikelabscheidung für Kleinfeuerungsanlagen - mittels Tiefenfiltration im Bypass-Betrieb

CFK-Recycling

intelligent building Blocks for On-orbit Satellite Servicing and Assembly

When using laser drilling, the material directly behind the drilled hole can be easily damaged. To prevent the damage, materials are placed at the...

Self-climbing SMART platform for maintenance of wind turbines

Flat dowels for lightweight construction elements in furniture construction and interior fittings

Wood insert for lightweight construction elements in furniture construction and interior fittings

Visual control of a swarm of cleaning robots

So far, the problem of sealing has been a major challenge when using rotary piston pumps. Piston rotors in conventional rotary piston pumps are based...

This multi-pass amplifier concept offers a previously unequalled output power in the kW range with a compact design and various scaling and...

The "robust one-shot interferometry" (ROSI) developed at the University of Stuttgart has been optimized in several aspects and now offers a...

Presented here is a rigid, non-driven lightweight chassis for utility vehicles that offers a significant weight advantage and includes a build-in ...

The compensating coupling presented here can be inexpensively produced by injection moulding. In contrast to conventional plastic couplings of ...

Here we present a newly developed crash absorber for cars with two different conditions for different impact situations. The first condition offers...

This efficient sealing method for multi-layer, woven, three-dimensional fluid containers enables a wide range of applications in a wide variety of...

Buildings such as skyscrapers, bridges, towers, wind turbines, cranes are stimulated to vibrate by wind or by the vehicles crossing them. Increasing...

The invention concerns a microproduction technology in the field of structuring methods for 3D microcomponents. From this approach, a novel...

In a project funded by the Baden-Württemberg Stiftung gGmbH, the Fraunhofer-Institut für Werkstoffmechanik IWM has developed an improved pre-treatment...

Foveated imaging for conventional image sensors with constant pixel pitch, cost-effectively manufactured in the smallest space. The functionality of...

Wireless transmision through a Data Bus Bridge

Circuit for recovering braking energy from electric motors

Tool adjustment at nanometer level through heat expansion 

The innovation presented herein, provides a new type of (white) light source with a most brilliant emission characteristic for applications which need...

The invention relates to a machining method for oxygen-free production and the devices necessary for this purpose. In this way, in particular, the...

The invention relates to a cutting head replacement system for water jet cutting. For the first time ever, with this new technology an automated ...

The technology relates to a transfer process of thin film microstructures produced on surfaces that can not be coated directly in PVD (cathode...